ADSL Inline Filter Installation: RJ12 Phone Sockets

• Locate the phone socket for your ADSL line and remove any existing RJ11 (clear square modular plug) phone cord from the telephone socket located on the wall
• Take your supplied ADSL inline filter and insert the telephone cord from the LINE side into the RJ12 wall socket.
• Insert the RJ11 phone cord or adapter that was previously plugged into the wall socket into the DSL filter on the PHONE side

• Repeat for EVERY phone socket on your ADSL phone line that has a working telephony device connected to it
  
  This includes, but is not limited to, the following list of devices:
  • Telephones
  • Fax machines
  • Modems
  • EFTPOS terminals

Important Note: If you have more than three (3) telephony devices on the ADSL line, an installer will need to visit you to install a central inline splitter. If you purchased an ADSL modem through iiNet, we will have provided you with a splitter (in lieu of the usual filter) but you will need to contact an installer to install it for you. You can find a list of installers here.

Click here to return to the Broadband ADSL index